MTB Air Fork RXF36 m.2 Air 29 / Offset 51mm/170mm

Pris:
15 199 kr
Inkl. 25% Moms
Art.nr:
P2065126
Antal:
Kommentar till butiken:
The race proven TTX 18 dampening from the DH Race Fork has been reworked for the all new RXF36 m.2 fork to give optimal traction and control on trails and Enduro race courses. The RXF36 m.2 is available as an Air or Coil fork. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved.
The damping adjustment range is set specifically for trail to Enduro race use with 15 clicks of low speed compression and low speed rebound. For the high speed compression damping you get 3 clicks plus a climb mode setting. The retuned twin piston three chamber air spring system allows total air spring tuning from the initial movement through to the bottom out.
We also improved the tire clearance. The chassis will take up to a whopping 29 x 2,8 and 27,5 x 2.8 as well as 27,5+ x 3,2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the race courses.
Technical Specifications:
Weight approx. 2050 g
Length 570 mm (axle to crown)
Tapered steerer tube 28,6 – 38,1 mm
Stanchion tubes 36 mm
Axle 15 x 110 mm
Offset 44/51 mm
Wheel size 29
Maximum tire sizes 29 x 2,8 / 27,5 x 2,8 / 27,5+ x 3,2
Aluminium design, hard anodized
Fully servicable and rebuildable
2 years limited warranty
Adjustment:
Spring rate and progression
15-click rebound damping
15-click low speed compression damping
3-click high speed compression damping
Climb mode
Purchased parts package:
1 MTB front fork RXF36 m.2 Air
1 axle 15 x 115 mm
1 star-nut
Owners manual